Elektronikbox Version H
Size does matter ! This is the smallest electronicbox on the market. The box is able to control the main electrical
functions of your motorcycle from a central location. The Electronicbox provides the following functions:
- Light control with switch and push button possible
- Integrated flasher relay, control via push buttons or switches
- The bike can be controlled by 2 buttons or 5 buttons.
- 6 status led´s for the output control integrated.
- emergency flash function
- comfort flasher function
- Control of horn
- Control of starter relais or brake light.
- Output for direction indicator led in speedo.
The 2 button mode is easy to use:
- A short press on one of the buttons will activate the indicators.
- A longer press (> 0,3 sec) on the left button switch on the horn.
- 2 short presses on the left button change between the low - and high beam.
- A long press (> 0,3 sec) activate the starter if the starter option is set.
You can use thin cable from the control box to the handlebars. This simplifies the wiring of cables in the handlebar. The flashing speed is about 90 cycles / minute and will not change if you use LED lights. A comfort flasher function can be activated and will turn off the turn signal automatically after 40 x if no button is pressed in the meanwhile. When using buttons you can activate an emergency flash function whith simultaneously pressing the flashing buttons (for example, press and hold the left, right, press and hold the left release) .
Manual for models from December 2024 (pdf):
Manual for models from March 2024 (pdf):
Manual for models from December 2021 (pdf)
Here is a small video, how you can set the options: https://youtu.be/i6eFb2FO4dk
Dimensions:
|
40 mm length x 12,5 mm wide x 25 mm height
|
Body material:
|
shock resistant ABS plastic, waterresist potted
|
Case Color:
|
Black
|
Connections:
|
0,14 qmm for inputs, 0,75 qmm for power outputs, 1,5 qmm for main line
|
Power consumption in operation:
|
7 mA
|
Maximum temperature:
|
100 degree Celsius
|
Maximum output current: |
5 Ampere Head light, 3 Ampere for other outputs |
Input voltage range:
|
7 - 16 Volt
|
Maximum current of the 12V ignition connector:
|
20 Ampere
|