Easy Keyless RFID
This keyless mainswitch for your bike can be connected with a fingerprint sensor or with an rfid antenna. The Easy Keyless RFID comes with a rfid antenna and 2 rfid tags
The activation of the module is made via a press on a button. Now you have 15 seconds time to put your rfid tag in front of the antenna. A red led on the antenna indicate the waiting state of the module. If the rfid tag is recognized then the led changes to blue color and the power for the bike is switching on. If the rfid tag is not recognized then the module fall back in sleep mode in order to reduce the power consumption of the bike to a minimum.
By the way, if you use a control box from us then there is no need to wire an extra button to the module. The Easy Keyless FP have an extra output what simulate the function of a start button, resulting that you can use your original start button at the bike also for the activation of the module.
Just feel free to download the installation manual (pdf) for further infos.
|
Dimensions:
|
Control module 50 mm x 42 mm x 125 mm, Fingerprint sensor 28mm x 15mm, 25mm thread
|
|
Body material:
|
shock resistant ABS plastic, waterresist potted
|
|
Case Color:
|
Black
|
|
Connections:
|
0,14 qmm for input, 1,5 qmm for power outputs
|
|
Power consumption:
|
Below 1 uA standby, about 30 mA in operation
|
|
Maximum temperature:
|
80 degree Celsius
|
| Maximum output current: |
15 Ampere for ignition, Lights, Horn and start relay |
|
Input voltage range:
|
7 - 18 Volt
|
