Digital harness version C-BS for button or switch control
All electronic boxes on the market reduce the amount of required cables on a bike. They make installations simpler and
fault finding easier. However, it´s surprising how much wiring remains on the bike, what result in a typical installation time
between 10 and 20 hours.
The digital harness C-BS ("BS" stands for switches and buttons) for the bike control via push buttons and switches is an
universal harness, what contain 2 small control boxes. The control boxes "talk" together via a thin serial bus cable. The switches,
push buttons and power cables are wired direct to the nearest box. This reduces the amount of cables and the installation
time significant in a typical bike installation. All outputs have integrated led´s what allow an easier testing while the installation. Some useful options are integrated. You can control your complete bike electric just with 2 buttons, without the need to learn complicated button combinations.
Manual from 1.2024 (pdf)
Manual from 12.2022 (pdf)
Manual from 12.2021 (pdf)
Here is a small video, how you can set the options: https://youtu.be/i6eFB2FO4dk
|
Dimensions:
|
Handle bar - and frame module: 50 mm x 42 mm x 12 mm
|
|
Body material:
|
shock resistant ABS plastic, waterresist potted
|
|
Case Color:
|
Black
|
|
Connections:
|
0,14 qmm for input, 0,75 qmm for power outputs
|
|
Power consumption in operation:
|
7 mA
|
|
Maximum temperature:
|
80 degree Celsius
|
| Maximum output current: |
5 Ampere / output, 1 Ampere for speedo |
|
Input voltage range:
|
6 - 18 Volt
|
|
Maximum current of the 12V ignition connector:
|
20 Ampere
|
Just feel free to use the interactive video for your decision: https://www.youtube.com/watch?v=HHugpMQEWbU . However, you can also use the following table:
