Micro-Speedo Modul
Don't fancy a clock store or Christmas tree on your bike and only want to fit the bare essentials of a speedometer to your bike? Then the Micro-Speedo is the right choice. The module is just 38 x 19 mm in size and 10 mm thick include cables. We decided to offer the module fully assembled and tested incl. 1 mm tinted plexiglass screen and 8 mm stainless steel button. This gives you absolute flexibility with the installation and only the phantasy is the border. You can download a housing drawing below and print it out with a 3D printer, modify it for your needs or, if you have a CNC milling machine, mill your own housing.
If you have draw your own housing then we would be happy if you send to us the Step or STL file. So we can share your drawing with other users and we send you the money back as a small thank you for your help.
However, If you prefer a ready made device in a standard housing then you can get it from us as well.
The speedometer is very easy to use: If the button is pressed and held down when the power supply is switched on, the wheel circumference appears on the display in cm and counts up between 50cm and 220 cm until the button is released. The last value is then saved in the module. If the button is pressed while driving or during a break, the daily kilometers driven appear on the display for about 1 second. After 1 second appear the total kilometers in 5 fast following letters. The 4 LEDs on the outside indicate neutral, high beam, indicators and oil pressure. Debouncing by the software allows the use of almost all common wheel sensors. However, we have tested the speedo only with our own sensor.
Here you can download the manual (pdf)
Here you can download a 3d file of the housing (stl)
Dimensions control module: | 35 mm x 18 mm x 10 mm |
---|---|
Housing: | Can be made from customer |
Input voltage range in use: | 12 - 15 Volt |
Absolute maximum voltage: | 18 Volt |
Connections: | Inputs 0,14 mm², 15 cm |
This product was added to our catalog on Wednesday 10 April, 2024.