Elektronikbox Version D
This electronic box version D controlls the main functions of your motorbike with push buttons or switches. The following options are possible:
- Integrated flasher relay, contol with buttons or switches
- Auto flasher off function, emergency flasher, "Low Light" dim modus adjustable
- Control of low - and high beam possible with 2 buttons or a switch
- Control of starter relay and motor off with 1 or 2 buttons
- Control of the horn
- Brake light control or user programmable dim function of the rear light.
- 8 status led´s at the outputs give a visible response of the power outputs.
The power outputs are short circuit protected with an implemented self reset function.
By the way, for Harley Davidson bikes you can use the D-Box in combination with the TSM/TSSM module if you wire the left and right output of the D-Box to the button inputs of the TSM/TSSM module. The use of the HD alarm system is no problem. This function is implemented since 8.2020.

The several functions are user programmable and can be changed at any time. Just press the horn button while switching on the power to the D-Box and your are in the "program" mode. A one time emergancy flash will indicate the option 1as indicated in the table of the manual. A press on the right or left indicator button will switch on or off a small showflasher function. So, you can easily program your own setting with 8 steps. For further infos, just feel free to take a look to the manual.
Manual for 2020 models (pdf)
Manual for older models before 11.2019 (pdf)
Here is a small video, how you can set the options: https://youtu.be/i6eFb2FO4dk
Dimensions:
|
50 mm length x 12,5 mm wide x 52 mm height
|
Body material:
|
shock resistant ABS plastic, waterresist potted
|
Case Color:
|
Black
|
Connections:
|
0,14 qmm for inputs, 0,75 qmm for power outputs, 1,5 qmm for main power
|
Power consumption in operation:
|
7 mA
|
Maximum temperature:
|
80 degree Celsius
|
Maximum output current: |
5 Ampere Head light, 3 Ampere for other outputs |
Input voltage range:
|
7 - 18 Volt
|
Maximum current of the 12V ignition connector:
|
20 Ampere
|
