Universal Relaybox RB-10
The Universal Relaybox RB-10 allow the control of up to 10 individual loads. The following functions are integrated:
- 10 outputs with 10 Ampere maximum / each allow the control of the most loads in a car.
- Every input can be user configured as button input or switch input.
- Every input can be configured for a control of the switch or button to ground or + 12 Volt.
- Every output can switch only if the ignition switch is on or independent of the ignition switch status.
- Every output can be adjusted for the drive of direction indicators. The flasher frequency is independend from the connected load.
- 11 integrated led´s allow the control of the outputs while the installation and programming.
The different functions are adjustable via 2 push buttons. Just remove the button pcb after the setup of the RB-10. This module is the first choice if you need to change the original harness due to it´s age or for a fast and flexible implementation of 12 Volt loads in e-mobile applications.
Schematic:
Manual (pdf)
|
Dimensions:
|
105 mm length x 50 mm wide x 35 mm height
|
|
Body material:
|
Plastic, water resist potted
|
|
Case Color:
|
Black
|
|
Recommended cables:
|
shielded 0,14 qmm for inputs, the shield connected to ground, 1,5 qmm for power outputs
|
|
Power consumption in operation:
|
3 mA, outputs off
|
|
Maximum temperature:
|
80 degree Celsius
|
| Maximum output currents: |
Max. 6 Ampere / output, max. 50 Ampere / Module |
|
Input voltage range:
|
8 - 18 Volt
|
