Axel Joost Elektronik
Pol Changer
Some bikes switch the outputs for the direction indicators to minus, when active. This make a change of the original indicators against aftermarket indicators a bit tricky. This polarity changer is the solution for it.It convert the ground switched signal from the bcm module or flasher relay to a positive supply voltage for the indicators. The module contains 2 separate channels. The maximum load is 60 Watt per side. With the green "Mode" cable you can decide if the outputs are switched on or off for 0,5 seconds when power on the module. This prevent the outputs against wrong signals when power on if a connected control box need a bit time for power up.
| Dimensions: | 38 mm x 16 mm x 11 mm |
|---|---|
| Body material: | ABS with 2 k epoxy resin potted |
| Input voltage range: | 6 - 18 Volt |
| Connections: | Inputs 0,14 mm², Outputs 0,75 qmm |
| Maximum output power: | 60 Watt / output |
| Maximum ambience temperature: | 80 degree Celsius |
This product was added to our catalog on Friday 15 November, 2019.
